LINEAR I.C. TRAINER    MODEL - LICDM100 

   This trainer has been designed with a view to provide practical and experimental knowledge of different linear I.C.s.   

SPECIFICATIONS

 (1) Following components are provided on  SINGLE  P.C.B. of Size 18" x 15" on tags:

      1. I.C.s                        
         Opamp 741                                             : 2 nos.
         JFET Opamp TL061                               : 2 nos.
         NORTON Opamp LM3900                   : 1 nos.
         Comparator 710                                     : 1 nos.
         Timer 555                                               : 1 nos.
         PLL  565                                                : 1 nos.
         Voltage Control Oscillator - 566               1 nos.
         Voltage regulator 723                              : 1 nos.
         Three terminal Regulator IC 7805            : 1 nos.        
         Three terminal Regulator IC 7905            : 1 nos.           

      2.Resistors                                                  : 60 Nos.
         covering all values from
         1 ohm to 20 M ohm.                               
      3.Capacitors                                               : 32 Nos.
         assorted values from 22 pf
         to 1000 uf including electrolytic,
         ceramic and polyester capacitors.
      4. Potentiometers                                         : 7 Nos.
      5.Transistor:-
         BC148B                                                  : 1  Nos.
         BC158B                                                  : 1  Nos.
         SL100                                                     : 1  Nos.
         SK100                                                    : 1  Nos.
         FET BFW10                                           : 1  Nos.
         2N3055                                                  : 1  Nos.
      6. Diodes:-
         1N4007                                                  : 4  Nos.
         1N4148                                                  : 2  Nos.
         5.6 V ZENER DIODE                            : 1  Nos.
         9.0 V ZENER DIODE                            : 1  Nos.
         12  V ZENER DIODE                            : 1  Nos.
         BA157                                                    : 1  Nos.
         LED                                                        : 1  Nos.
         NEON LAMP                                        : 1  Nos.

(2) Built-in Power Supplies
      1. Built in Power Supply :-
          Regulated D.C. voltage                           : +12V,  500mA
                                                                         -12 V, 500mA.
         Unregulated D.C. voltage                         : 0 to 20 V, variable, 500mA.

(3) Built-in Signal Generator:-
         Frequency                                               : 2 Hz to 200 KHz in five freq. ranges
         Amplitude                                                : 0 to 20 Vpp.
         Waveforms                                              : Sine, Square, Triangle.

(4) Bread Board :

    640 Tie point and 1 Distribution strip Breadboard provided - 175mm long accepting 0.56 mm dia (24
    SWG) ordinary wires for bread boarding ckts. Slot marking provided. The conducting strips is of SnCu.

(5). Standard Accessories :
      1.                                                               A manual having 20 Practical.
      2.                                                               Connecting patch cords - 10 Nos.

 EXPERIMENTS:

 1. Study of OPAMP characteristics:
       Open loop gain, output resistance, differential input resistance, unity gain, bandwidth, rated output, offset
       voltage, input bias current, input noise current, Common Mode rejection ratio (CMRR), Common mode 
       input resistance etc.
       Study of OPAMP applications:
       Opamp as Inverting amplifier, Non-inverting amplifier, Difference amplifier, Inverting summing
       amplifier, Voltage follower, differentiator, Integrator, log amplifier, Limiter, AC-DC converter

 2. Study of Voltage Regulators: -
      Load regulation, Line regulation, ripple etc.
 3. Study of Comparators: -
      Comparator, Submit trigger, Pulse width modulator etc.
 4. Study of Timer: -
      Astable, Monostable, Pulse width modulator etc.
 5. Study of Phase Lock loop:-
      Measurement of lock range, VCO sensitivity, VCO linearity etc.
 6. Study of Voltage Control Oscillator:-
      Measurement of lock range, VCO sensitivity, VCO linearity etc.