|
This trainer has been designed with a view to provide practical and experimental knowledge of RPS using IC 723 low & high voltage on SINGLE PCB.
FEATURES
1.
The schematic circuit diagram printed on P.C.B. for all terminals, switches, components and power
Supplies.
2. All parts are visible from top and the pin extensions are available around parts with diagrams.
3. All parts are soldered on tags to replace without opening the trainer board.
4. All terminals (2 mm sockets) soldered properly to avoid loose connections.
SPECIFICATIONS
1. Power supply requirement : 230V AC, 50 Hz.
2. Following parts provided on Single PCB with connecting terminals.
a. IC 723
b. Mains transformer primary 230V A.C.,
Secondary centre tap 0-10V AC at 500 mA.
c. Silicon Junction Diodes - 1N4002 - 4 Nos.
d. Filter Capacitors - 1000u/25V - 2 Nos.
e. Zener Diode - 5.1 V - 1 No.
f. Load Resistors - 2 No. (1K and 2K2)
g. Two NPN transistor
h. Medium Power transistor
3. Standard Accessories : 1. User Manual with practical and circuit diagrams.
2. Connecting patch cords - 10 nos.
|